Project Source Support - Version 1.1 Update - 6 JUNE

Zsadist · July 2015

No, the prompt is the exact same. The script is the exact same.

Ishin · July 2015

...terrible. You guys may want to check into return isPrompt(), then instead of setting to perl regex, you set to Lua function. That will make it so that it fires on prompt rather than on a matched trigger. You can still cap things off of it, you just have to do it via gmcp instead of capping off the line itself. Which, probably, is more efficient. It's how I did it in my system that I'm currently coding on, and I am coding it to be as efficient as I can make it.

Trager · July 2015

The prompt is captured via perl regex? Holy crap. Cmud called, they're wondering why you copyin'.

Tenshyo · August 2015

This thing still being updated and maintained?

Leana · August 2015

With the GMCP changes a lot of people reported the system broken. I found this solution and I'm not sure how good it is or if it'll work, but here you go:

--Click 'Toolbox' -> 'Script Editor'

--click 'Search' on the right.

--search term: ps.vitals.status

-- click on char_vitals and look for the highlighted 'ps.vitals.status'

--Just above you will see this:


	for _, key in ipairs(tmp.vitals) do
		if gmcp.Char.Vitals[key] then
			ps.vitals[key] = gmcp.Char.Vitals[key]
		end
	end


--You want to make it look like this:

	for _, key in ipairs(tmp.vitals) do
		if gmcp.Char.Vitals[key] then
			ps.vitals[key] = gmcp.Char.Vitals[key]
		end
		if gmcp.Char.Status[key] then
			ps.vitals[key] = gmcp.Char.Status[key]:lower()
		end
	end

Issath · September 2015

Leana said:
With the GMCP changes a lot of people reported the system broken. I found this solution and I'm not sure how good it is or if it'll work, but here you go:

--Click 'Toolbox' -> 'Script Editor' --click 'Search' on the right. --search term: ps.vitals.status -- click on char_vitals and look for the highlighted 'ps.vitals.status' --Just above you will see this: for _, key in ipairs(tmp.vitals) do if gmcp.Char.Vitals[key] then ps.vitals[key] = gmcp.Char.Vitals[key] end end --You want to make it look like this: for _, key in ipairs(tmp.vitals) do if gmcp.Char.Vitals[key] then ps.vitals[key] = gmcp.Char.Vitals[key] end if gmcp.Char.Status[key] then ps.vitals[key] = gmcp.Char.Status[key]:lower() end end

I put this in, any idea why Im spamming caloric?

Isande · September 2015

@issath That GMCP fix code you put in wouldn't make you spam caloric. If you're stuck in a curing loop, sometimes typing DIAG will help stop it by refreshing the Afflictions list. If it's still happening, I have no clue what's wrong but @Paithan or @Zsadist might, as they are the devs for Project Source.

Issath · September 2015

@Isande thanks

Ashmer · September 2015

@Isande's signature is unbelievably perfect for system support questions.

Eldresh · September 2015

So I started trying project source out recently... and I have no prompt? Played around with it a while, still can't figure out why I have no prompt.

Zsadist · September 2015

@Eldresh, if you want to get with me in a few hours after I get off work, I can fix you up. Granted no one else manages to fix you up.

Eldresh · September 2015

@zsadist I get off work in a few hours myself, so that works for me.

Tenshyo · September 2015

Hey, building on Leana's fix

Source people, search char_vitals in your scripts and replace it with this link here
http://hastebin.com/ohujusicat.avrasm

Pilar · September 2015

Hiiii,

Been wanting to get back into playing again and decided to try out Source.
Seems to work great except I keep getting spammed with this.

Lua error:[string "ps.defs.lists.Monk = {..."]:100: attempt to index field 'levels' (a nil value)Lua error:[string "ps.defs.lists.Monk = {..."]:100: attempt to index field 'levels' (a nil value)Lua error:[string "ps.defs.lists.Monk = {..."]:100: attempt to index field 'levels' (a nil value)Lua error:[string "ps.defs.lists.Monk = {..."]:100:
attempt to index field 'levels' (a nil value)

Looks like...

Not sure what I did wrong but if any one knows please let me know!

Thanks

Zsadist · September 2015

What in the fuck...... Download Teamviewer and get with me when you can. I'll see if I can crash through the code and find your issue. Abit odd that its spamming that though.

Pilar · September 2015

I got rid of the scripts entirely and it stopped for now...

Probably not the best idea but I don't mind deffing up manually for now.

EDIT: Also noticing I can't see my health/mana/wp stats at all either

Oleis · September 2015

You probably still need to enable GMCP in Mudlet (in your preferences). All signs point to that, at least.

Dristin · September 2015

There were also some GMCP changes recently that didn't agree too well with earthshaker/blackout/tripwire systems. A sign of that, if you have GMCP enabled in preferences, is that stats (and some other stuff) won't update. It could be related to that issue, but I don't know. Thought I'd throw that out there.

Satomi · September 2015

um. That happens when your def list still has a 'tw' value instead of a 'ps' value. Happened to me for Sciomancer and Praenomen Rituos.

In your case, it is likely an issue with your monk def list.

The prompt issue is implementing the fix Leana described earlier.

Prel · September 2015

@Leana, thanks so much for the fix. I was going nuts figuring out why my prompt wasn't working. I can see it now after adding in the fix you posted back in August. Thanks!

Prel · September 2015

I'm encountering a problem with the mapper from this project. Every time I log in, the mapper area shows up blank all the time. I deleted the map and map.xml files as directed and redownloaded the map through Mudlet, but I could not get the map to show in the mapper window.

Did something change to affect the map not showing up in the mapper window? And how do I fix this so it won't be a problem again in the future?

Satomi · September 2015

What I do is I turned the mapper off and I use the option to rip the in game map and display it in the map slot. I just had to CONFIG MAPVIEW ON first

Prel · September 2015

Thank you. I got ingame help from someone who's done a great job helping me figure out why the map wasn't loading.

Svetlana · October 2015

I'm playing a Zealot and using Project Source. Everything looked great until I hit an issue with defup. Defup repeatedly eats through my skullcap and applies caloric over and over. I had to pause the system and then unpause it to stop defup from burning through my small cache of skullcap and caloric vial.

Something is not recognizing these two defences already put up.

I don't think I have the abilities to either put up deathsight and warmth (Zealot) yet.

Satomi · October 2015

I'll see about helping you when I get home from work, I never took a look at skullcap cause I've always had Deathsight. It could just be missing a capture. Anyways, hopefully someone else will be able to help you before then!

Tenshyo · October 2015

@Svetlana are you still having this issue? Next time we're on at the same time, send me a tell and we'll get you sorted.

Svetlana · October 2015

Yes, I still have the same issue I spoke about yesterday. PS still burns through my cache of skullcap and uses up my caloric vial until I pause the system.

Here's part of what I was seeing while PS was putting up the defences:

Caloric:

[622(103%)|609(108%)|0|105%|106%|66.61%|D:0%|Sp:9%] [HM eb]
apply caloric
You take out a caloric salve and quickly rub it on your skin.
concentrate
[622(103%)|609(108%)|0|105%|106%|66.61%|D:0%|Sp:9%] [HM eb]

I'm not sure why concentrate is in there. No defence message was put up after applying caloric.

Skullcap (for deathsight):

[622(103%)|609(108%)|0|105%|106%|66.61%|D:0%|Sp:9%] [HMs eb]
outc skullcap;eat skullcap
You remove 1 skullcap, bringing the total in the cache to 7.
You eat a skullcap flower.
[Source]: Info: LOST BALANCE HERB (skullcap)
A miasma of darkness passes over your eyes and you feel a link to the Underking
form in your mind.

This one didn't show the defence put up. It will continue to burn through the skullcap.

I checked the source.xml date. It showed 10/17/15. Is this file overwritten every time the profile is saved?

Satomi · October 2015

You'll need to create a trigger to capture the defense, for deathsight and caloric. Then you'll need to verify that Skullcap Deathsight and Caloric are within the defenses script under curatives. I'll see about writing something up for you if Tenshyo doesn't beat me to it.

Tenshyo · October 2015

@Svetlana get ahold of me and I'll take a look if you want.

Maldru · October 2015

In the curatives script

waterbreathing = {
		action = {"outc pear;eat pear", "outc pear;eat pear"},
		balances = {"herb"},
		consumes = {"herb"},
		reqs = function() if ps.living then return checkCache("pear") else return checkCache("pancreas") end end,
		redef = true,

Needs to be changed to

waterbreathing = {
		action = {"outc pear;eat pear", "outc pancreas slice;eat pancreas"},
		balances = {"herb"},
		consumes = {"herb"},
		reqs = function() if ps.living then return checkCache("pear") else return checkCache("pancreas") end end,
		redef = true,

otherwise it'll keep trying to use a pear to activate waterbreathing for undead characters.

This is on the 1.1 source.xml

EDIT:

Additionally, under the bloodloch script

ps.run.quests.bloodloch = {
	[8664] = function()
		if hasItem("beetle") then
			send("sell vermin to enzo")
		end
	end,
}

Needs to be changed to

ps.run.quests.bloodloch = {
	[9190] = function()
		if hasItem("beetle") then
			send("sell vermin to enzo")
		end
	end,
}

As it's trying to sell to Enzo in the wrong spot (His old one I guess?)
Additionally, it will keep trying to sell even if there's no vermin in the inventory, not sure what's wrong with the hasItem function whether it's not able to read the inventory anymore due to changes in coding or what. By "Trying to sell even if there's no vermin" I mean as long as you stay within the room it'll try to sell to him.

function hasItem(name)
	if not ps.charItems or not ps.charItems.full then return false end
	if name then
		for _, item in pairs(ps.charItems.full) do
			if item[1]:lower():find(tostring(name):lower()) then return true end
		end
	end
	if tonumber(name) then
		for _, item in pairs(ps.charItems.full) do
			if tostring(item[2]) == tostring(name) then return true end
		end
	end

	return false
end

Something wrong with this code I guess?

Howdy, Stranger!

Quick Links

Categories

In this Discussion

Project Source Support - Version 1.1 Update - 6 JUNE

Comments